How can I get more bend out of my bending machine equipment?

Bending machine equipment in the use of its bending degree is an important criterion on behalf of its performance, in addition to the correct grasp of the operation method to improve the bending degree can be, so that the equipment can be made to play the proper use of performance out.

To enable the bending machine to bend More, it is possible to arrange auxiliary hydraulic cylinders on its table or ram to create deflection in the opposite direction; alternatively, a pivot at each end of the front and rear lower crossbeams, while the table is positioned between the front and rear lower crossbeams, with the ends supported on the pivot.

Depending on the length of the table, the lower beam of the bending machine is arranged with a number of hydraulic cylinders with their piston rods on top of the table. When bending, these hydraulic cylinders are fed with oil to produce upward pressure on the table, causing the table to deflect upwards, in the same direction as the slider deflection.

On this basis, the working plane of the bending machine table is machined to be slightly convex in the middle, which helps to compensate for the deflection generated by the table during bending. A typical example of this is the use of a number of angled wedges to create a projection on the table working surface; and the wedges are connected to a screw and worm drive.

In addition, the placement of the hydraulic cylinders in the bending machine can also be used to make the deflection of the slider and the table in the same direction. However, since there are some differences in the mechanical properties of the sheet even for the same grade, both the use of the same die and the same convex die into the depth of the concave die can cause changes in the bending angle due to differences in the mechanical properties of the sheet.

Bending machine belongs to a kind of forging and pressing machinery, as it becomes more and more automated, the equipment is widely used in the Metal Processing industry, involving aviation, light industry, metallurgy, chemical industry, construction, ships, automobiles, electric power, electrical appliances, decoration and other fields.